Faber Products

HIDRO PROTECTOR MM is a high-performance impregnating treatment to protect natural stone against staining and the harmful effects of water and rising damp. It is characterised by a 100% water-based, eco-friendly formula and for its lack of volatile organic compounds (V.O.C. Free), therefore, its use is not harmful to the environment or for the health of users, either during or after application.

The specific characteristic of HIDRO PROTECTOR MM is that it penetrates natural stone deep down, guaranteeing strong, lasting protection without compromising the original breathability of the surface, since it does not create any type of film. It also does not alter the original appearance of the material.

HIDRO PROTECTOR MM is a product that combines water-repellent properties with a stain-proofing function in a single solution, especially on glossy surfaces. It also adds a marked resistance to rising damp, responsible for the majority of problems generally found on natural stone: persistent damp marks, formation of rust, yellow damp marks, flaking or detached surfaces (pitting), salt efflorescence and surface aggressions.

HIDRO PROTECTOR MM is also certified for contact with foods and therefore, is a valid solution for protecting kitchen worktops.

Materials
Agglomerate cement-marble | Agglomerate resin-marble | Agglomerate resin-quartz | Slate | Sandstone | Basaltina – Lava Stone | Granite | Limestone | Marble | Quartzite | Travertine

PROTEX WB is a high-performance impregnating treatment to protect natural stone against staining and the harmful effects of water and rising damp. It is characterised by a 100% water-based, eco-friendly formula and for its lack of volatile organic compounds (V.O.C. Free), therefore, its use is not harmful to the environment or for the health of users, either during or after application. The specific characteristic of PROTEX WB is that of penetrating natural stone deep down, guaranteeing strong, lasting protection without compromising the original breathability of the surface, since it does not create any type of film or alter the original appearance of the material. PROTEX WB is a product that combines water-repellent properties with a stain-proofing function in a single solution, especially on glossy surfaces, together with a distinctive resistance to rising damp, responsible for the majority of problems generally found on natural stone: persistent damp marks, formation of rust, yellow damp marks, flaking or detached surfaces (pitting), salt efflorescence and surface aggressions.

Unlike traditional stain-proofing protective treatments available, PROTEX WB helps to increase the resistance of the natural material to dirt and foot traffic, working as a definitive solution due to its high resistance to the action of de-waxers. PROTEX WB is also certified for contact with foods and therefore, is a valid solution for protecting kitchen worktops.

PROTEX WB is particularly recommended for pre-installation treatment on natural surfaces:

• it is used as a 6-side pre-treatment to combat any form of rising damp and to guarantee maximum protection. In this case, the installation of slabs or tiles must be carried out using high-quality adhesive or mechanical fastening.
• it is used as a 5-side pre-treatment (top+edge) without any further processes. In this case, the installation of slabs or tiles must be carried out using a medium-high-quality adhesive.
• It can be used as a pre-treatment on 5 sides (top+edge), together with a treatment applied to the underside (bottom), in the event that slabs or tiles are used with a medium-low quality adhesive or simple cement-mortar mix.

PROTEX WB is an extremely valid solution to stain- and waterproof natural stone that has already been laid. In this case, however, the protection against rising damp will depend on the moisture already present inside the material, which will have already been subject to the passage of moisture during the laying process. To get the best possible performance, including with regard to protection against rising damp, it is therefore necessary for the surface to be free from older damp stains and it is also important to make sure that the surface being treated is as dry as possible; this is to allow the product to penetrate correctly. In any case, it is always preferable to pre-treat natural stone.

In both cases, pre- or post-installation, PROTEX WB is an excellent stain-proofing product for glossy compact surfaces that have been polished, brushed or flamed. In case of application to rough, matt or unfinished surfaces, PROTEX WB can be combined with a surface stain-proofer to achieve maximum performance; it will act as a primer to maximise the effectiveness and durability of the stain-proofing treatment applied successively. Both in case of pre- and post-laying treatment, PROTEX WB makes natural stone polishing and buffing operations easier by limiting water-absorption by the surface. It also cuts drying time.

Materials
Agglomerate cement-marble | Agglomerate resin-marble | Agglomerate resin-quartz | Slate | Sandstone | Basaltina – Lava Stone | Granite | Limestone | Marble | Quartzite | Travertine

HIDRO SST is a top-quality impregnating treatment to protect the natural stone against the harmful effects of water and rising humidity. It is characterized by a 100% water-based, eco-friendly formula and for its lack of volatile organic compounds (V.O.C. Free), therefore, its use is not harmful to the environment or for the health of users, either during or after application. The specific characteristic of HIDRO SST is that of penetrating natural stone deep down, guaranteeing strong, lasting protection without compromising the original breathability of the surface, since it does not create any type of film. It also does not alter the original appearance of the material.

HIDRO SST is a product that combines water-repellent properties with a good resistance to rising damp, which is responsible for the majority of problems generally found on the natural stone: persistent damp marks, the formation of rust, yellow damp marks, flaking or detached surfaces (pitting), salt efflorescence and surface aggressions. Unlike traditional water-repellent and damp-proofing treatments available, HIDRO SST helps to increase the resistance of the natural material to dirt and foot traffic, working as a definitive solution due to its high resistance to the action of de-waxers.

HIDRO SST is also certified for contact with foods and therefore, is a valid solution for protecting kitchen worktops.

Materials
Agglomerate cement-marble | Agglomerate resin-marble | Agglomerate resin-quartz | Slate | Sandstone | Basaltina – Lava Stone | Granite | Limestone | Marble | Quartzite | Travertine

MA 90 is a solvent-based, stain-proof, colour enhancer with excellent properties to leave a semi-gloss satin finish on natural stone and materials with non-polished finishes and a medium to medium-high degree of absorption.

MA 90 is able to give the treated surface an in-depth wet look, even on particularly absorbent materials, creating at the same time a semi-polished surface finish and a warm colouring that enhances the natural grain and specific aesthetics of the surface.

MA 90 confers excellent water-repellent and stain-proof qualities. It is resistant to UV rays, will not yellow over time and is suitable for use on indoor and outdoor surfaces.

Materials
Slate | Sandstone | Basaltina – Lava Stone | Cement tile | SConcrete | Cotto | Granite | Limestone | Marble | Manufactured Stone (Eco-stone) | Porphyry | Quartzite | Terracotta | Travertine | Tuff | The product is not suitable for use on polished surfaces.

DPS is an innovative solvent based treatment to give excellent water repellent features to the treated surface, to avoid the rising or absorption of water or huumidity. Differently from the traditional treatments, DPS can be used even on sufaces that are already afflicted by humidity related issues, like salt and efflorescences foramtion, rust and oxidations.

For this reason DPS is a ideal soltuion to restore all the already installed surfaces afflictec by humidity related issues. Thanks to its innovative formulation DPS can penetrates the material for several millimiters. For this reason it gives the water repellent protection even in case the surface will be subjected to grinding/polishing procedure.

Materials
Agglomerate cement-marble | Agglomerate resin-marble | Agglomerate resin-quartz | Slate | Sandstone Basaltina – Lava Stone | AMolted basalt | Cement tile | Slate | Concrete | Grout joints Cementicious | Granite | Slate | Sandstone Basaltina – Lava Stone | Limestone | Marble | Brick facings | Porphyry | Quartzite | Travertine | Tuff |

AS 930 CP is a solvent-based, protective treatment against staining substances and acid etching.

AS 930 CP provides protection against stains and acid etching to all the surfaces where this kind of protection is required, such as tables and countertops, vanity tops.

AS 930 CP is a product that leaves a natural finish so that, after the application, the tone of the material will remain the same.

SUITABLE ON: Marble, Travertine, Limestone, Acid-sensitive Materials

Materials
Agglomerate cement-marble | Agglomerate resin-marble | Limestone | Marble | Travertine

DEEP ENHANCER is a solvent-based, impregnating, color-enhancing, stain-proof, and wet-look non-filming protective treatment to revive ultra-compact surfaces characterized by minimum absorption capacity. It is used to enhance the colour and tone of more compact materials such as ceramics, porcelain stoneware, quartz agglomerate, and natural polished stones, adding a matt finish without creating a surface film. Compared to traditional wet-look colour enhancers that, when applied to compact surfaces leave a patina or surface residue, DEEP ENHANCER is also able to penetrate the least absorbent materials, creating a solution that is truly one of a kind.

DEEP ENHANCER provides excellent water-repellent and stain-proof qualities to the surfaces to which it is applied, making daily cleaning and maintenance of treated surfaces easier. It is also certified for use with foods and therefore, it can be used as a stain-proof, color-enhancing treatment on kitchen worktops.

Materials
Agglomerate resin-marble | Agglomerate resin-quartz | Basaltina – Lava Stone | Ceramic Craquele | Ceramic Glazed | Clinker | Granite | Porcelain gres Lappato | Porcelain gres Honed | Porcelain gres Natural or Structured | Limestone | Marble | Travertine | ADEEP ENHANCER can be applied to natural stone with polished, brushed or brushed and flamed finish

B1 700 is a protective, solvent-based, stain-proof treatment fast drying and specifically formulated to not alter the appearance of the materials on which it is applied in any way, leaving the surface with high stain-proof performance. The product is particularly recommended on all surfaces that are sensitive to colour changes following the application of an impregnating agent.

Due to these characteristics, B1 700 is a great solution for treating natural stone, such as limestone, which are generally difficult to protect due to changes in colour. It’s quick and easy to apply, it doesn’t create any film and therefore, it does not change the original breathability of the treated surface. It’s UV resistant, it won’t end up yellowing over time and is suitable for use indoors and outdoors.

Materials
Agglomerate cement-marble | Agglomerate resin-marble | Slate | Sandstone | AMolted basalt | Basaltina – Lava Stone | Cement tile | Concrete | Clinker | Cotto | Granite | Limestone | Marble | Porphyry | Quartzite | Terracotta | Travertine | Tuff |

CONCRETE HARDENER is a water-based impregnating and hardening sealer of the highest quality, specifically developed to speed up and simplify the mechanical sanding and polishing process of concrete floors.

CONCRETE HARDENER is characterized by a 100% water-based, eco-friendly formula and for its lack of volatile organic compounds (V.O.C. Free), therefore, its use is not harmful to the environment or for the health of users, either during or after application.

CONCRETE HARDENER, when used as part of the sanding and polishing process, offers various benefits:

– It consolidates and hardens the material as it increases the hardness of the treated surface, and provides better mechanical resistance against abrasion and scratches.
– It drastically limits water absorption on the floor and prevents all of the problems linked to excessive moisture in the concrete;
– It also speeds up the drying time required by the surface before it can be subjected to other processing or treatment.

Materials
Concrete

CP 5 A little goes a long way.

Easy to apply.

Anti-scratch maintenance treatment, to be applied on surfaces treated with AS 930 CP.

Materials
Agglomerate resin-marble | Agglomerate cement-marble | Limestone | Marble | Travertine |

HIDRO 150 is a protective, stain-proof treatment, specifically developed to give top-ranking, lasting protection against stains to natural stone and all materials requiring it. HIDRO 150 is quick and easy to apply; it forms no surface film and therefore, it does not change the original breathability of the treated surface.

HIDRO 150 is a neutral product that will not alter the tone or colouring of the material to which it is applied. It is resistant to UV rays, will not yellow over time and is suitable for use on indoor and outdoor surfaces. HIDRO 150 is also certified for use with foods and therefore, it can be used to apply stain-proof treatment to kitchen worktops. HIDRO 150 can also be used as a surface stain-proofing surface treatment in conjunction with a high penetrant water-repellent primer.

Materials
Agglomerate cement-marble | Agglomerate resin-marble | Slate | Sandstone | Agglomerate resin-quartz | Basaltina – Lava Stone | Cotto | Granite | Limestone | Marble | Porphyry | Quartzite | Terracotta | Travertine | Tuff |

LIMESTONE DENSIFIER is a water-based impregnating agent of the highest quality, specifically developed to speed up and simplify the mechanical sanding and polishing process of limestone and lime-based materials, which are more difficult to polish on account of their porous nature and their high capacity to absorb water. LIMESTONE DENSIFIER is characterised by a 100% water-based, eco-friendly formula and for its lack of volatile organic compounds (V.O.C. Free), therefore, its use is not harmful to the environment or for the health of users, either during or after application.

LIMESTONE DENSIFIER, when used as part of the sanding and polishing process, offers various benefits:

– It drastically limits water absorption on the floor and prevents all of the problems linked to excessive moisture in the stone;
– It also speeds up the drying time required by the surface before it can be subjected to other processing or treatment.
– It speeds up the mechanical sanding and polishing process, allowing the operator to treat larger surfaces within the same amount of time than would be possible on untreated materials, as it reduces the friction between the surface and the polishing tool.
– It significantly reduces wear and tear to polishing tools as well as the amount of water needed to complete the job.
– Material is given pronounced damp proof properties.
– Surfaces become water-repellent
– It reduces the possibility of dirt build up on the material
– The performance of any stain-proofing product applied afterwards is significantly increased.
– It also increases the results achieved by the polishing grain used.

The specific characteristics of this LIMESTONE DENSIFIER is that it penetrates the limestone deep down, guaranteeing tough, lasting protection against rising damp, which is responsible for most of the problems generally found with this material: persistent damp marks, formation of rust, flaking and pop-ups, and saline efflorescence, which are responsible for attacking the surface. LIMESTONE DENSIFIER also does not compromise the original breathability of the surface, since it does not create any type of film or alter the original appearance of the material.

LIMESTONE DENSIFIER also increases a material’s resistance to dirt and foot traffic, also making it possible to leave a matt, dirt-resistant finish on limestone surfaces that are generally very complicated to reach with traditional treatments. LIMESTONE DENSIFIER is a definitive solution, as it can withstand the action of de-waxing products and it is also certified for contact with foods and therefore, is a valid solution for protecting kitchen worktops. LIMESTONE DENSIFIER can be combined with a surface stain-proofer to achieve maximum performance; it will act as a primer to maximise the effectiveness and durability of the stain-proofing treatment applied successively.

LIMESTONE DENSIFIER is also recommended as a pre-installation treatment for limestone:
– it is used as a 6-side, pre-treatment to prevent rising damp, leaving a high degree of protection without compromising adherence between the underside of the material and the bonding agent used, even in the event that stone can be installed with simple cement mortar or mechanical securing.

– it is used as a 5-side, pre-treatment (top+edge) in the event that stone can be installed with top-quality mortar or mechanical fastening.

Materials
Limestone

P147 is a solvent-based, impregnating, colour-enhancing, stain-proof and wet-look non-filming treatment. It is used to enhance the colour and tone of absorbent surfaces, adding a matt finish without creating a surface film. P147 is recommended for treating natural stone, agglomerates, cotto and terracotta, and all materials with a medium-low, medium and medium-high level of absorption.

Compared to traditional wet-look colour enhancers, P147 penetrates deep into the materials without creating a surface film and it is extremely simple to apply without the risk of uneven aesthetic finishes. P147 thanks to these characteristics, is specifically indicated to be used outdoors or on surfaces that due to their nature, need to withstand conditions with continued presence of water, such as showers, fountains and washbasins. It has a lasting effect, can withstand UV rays and the elements and will not yellow if exposed to sunlight.

P147 confers excellent water-repellent and stain-proof qualities, making daily cleaning and maintenance of treated surfaces easier. It is also certified for use with foods and therefore, it can be used as a stain-proof, colour-enhancing treatment on kitchen worktops..

Materials
Agglomerate cement-marble | Agglomerate resin-marble | Slate | Sandstone | Basaltina – Lava Stone | Molted basalt | Cement tile | Concrete | Cotto | Granite | Limestone | Marble | Manufactured Stone (Eco-stone) | Porphyry | Quartzite | Terracotta | Travertine | Tuff | The product is not suitable for use on polished surfaces. |

SAFE MARBLE is a water-based treatment specifically devised and developed to increase surface grip on marble, travertine, limestone and lime-based floors, removing the problems linked to their slippery surfaces. SAFE MARBLE is a unique product that solves the problems of slipping on lime-based materials, which, in view of their nature, are usually difficult to treat

SAFE MARBLE is acts directly on the surface of the material to which it is applied, creating micro-erosions that are invisible to the naked eye and which boost the run-off of water to increase surface grip and therefore reduce slipping in wet conditions, either with footwear or bare feet.

SAFE MARBLE also leaves the treated surface with good water-repellent properties; it is easy to apply and when the instructions and timeframe provided for the correct use are followed, SAFE MARBLE will not alter the colour of the material treated.

Materials
Agglomerate cement-marble | Agglomerate resin-marble | Porcelain gres Lappato | Limestone | Marble | Travertine |

WET LOOK ECO is a water-based, impregnating, colour-enhancing, stain-proof and wet-look non-filming treatment. It is used to enhance the colour and tone of absorbent surfaces, adding a matt finish without creating a surface film. WET LOOK ECO is recommended for treating natural stone, agglomerates, cotto and terracotta, and all materials with a medium-low, medium and medium-high level of absorption.

Compared to traditional wet-look colour enhancers, WET LOOK ECO penetrates deep into the materials without creating a surface film and it is extremely simple to apply without the risk of uneven aesthetic finishes. WET LOOK ECO thanks to these characteristics, is specifically indicated to be used outdoors or on surfaces that due to their nature, need to withstand conditions with continued presence of water, such as showers, fountains and washbasins. It has a lasting effect, can withstand UV rays and the elements and will not yellow if exposed to sunlight.

WET LOOK ECO confers excellent water-repellent and stain-proof qualities, making daily cleaning and maintenance of treated surfaces easier.

Materials
Agglomerate cement-marble | Agglomerate resin-marble | Slate | Sandstone | Basaltina – Lava Stone | Molted basalt | Cement tile | Concrete | Cotto | Granite | Limestone | Marble | Manufactured Stone (Eco-stone) | Porphyry | Quartzite | Terracotta | Travertine | Tuff | The product is not suitable for use on polished surfaces.

YS ONE is a water-based treatment specifically devised and developed to increase surface grip on ceramic, stoneware, quartz, and siliceous stone floors, removing the problems linked to their slippery surfaces.

YS ONE is a unique product that acts directly on the surface of the material to which it is applied, creating micro-erosions that are invisible to the naked eye and which boost the run-off of water to increase surface grip and therefore reduce slipping in wet conditions, either with footwear or bare feet.

The product is easy to apply and after treatment with YS ONE, the floor will need no regular maintenance to preserve its non-slip surface. When applied according to the instructions and timeframe provided for the correct use, YS ONE will not alter the colour of the material treated.

Materials
Agglomerate resin-quartz | Molted basalt | Ceramic Glazed | Granite | Porcelain gres Honed | Porcelain gres Natural or Structured

SAFE MARBLE is a water-based treatment specifically devised and developed to increase surface grip on marble, travertine, limestone and lime-based floors, removing the problems linked to their slippery surfaces. SAFE MARBLE is a unique product that solves the problems of slipping on lime-based materials, which, in view of their nature, are usually difficult to treat

SAFE MARBLE is acts directly on the surface of the material to which it is applied, creating micro-erosions that are invisible to the naked eye and which boost the run-off of water to increase surface grip and therefore reduce slipping in wet conditions, either with footwear or bare feet.

SAFE MARBLE also leaves the treated surface with good water-repellent properties; it is easy to apply and when the instructions and timeframe provided for the correct use are followed, SAFE MARBLE will not alter the colour of the material treated.

Materials
Agglomerate cement-marble | Agglomerate resin-marble | Porcelain gres Lappato | Limestone | Marble | Travertine |

WET LOOK ECO is a water-based, impregnating, colour-enhancing, stain-proof and wet-look non-filming treatment. It is used to enhance the colour and tone of absorbent surfaces, adding a matt finish without creating a surface film. WET LOOK ECO is recommended for treating natural stone, agglomerates, cotto and terracotta, and all materials with a medium-low, medium and medium-high level of absorption.

Compared to traditional wet-look colour enhancers, WET LOOK ECO penetrates deep into the materials without creating a surface film and it is extremely simple to apply without the risk of uneven aesthetic finishes. WET LOOK ECO thanks to these characteristics, is specifically indicated to be used outdoors or on surfaces that due to their nature, need to withstand conditions with continued presence of water, such as showers, fountains and washbasins. It has a lasting effect, can withstand UV rays and the elements and will not yellow if exposed to sunlight.

WET LOOK ECO confers excellent water-repellent and stain-proof qualities, making daily cleaning and maintenance of treated surfaces easier.

Materials
Agglomerate cement-marble | Agglomerate resin-marble | Slate | Sandstone | Basaltina – Lava Stone | Molted basalt | Cement tile | Concrete | Cotto | Granite | Limestone | Marble | Manufactured Stone (Eco-stone) | Porphyry | Quartzite | Terracotta | Travertine | Tuff | The product is not suitable for use on polished surfaces.

ALGAFLOOR is a concentrated neutral detergent with very low residues for the daily cleaning of any type of surface with a minimum degree of absorption. The product leaves behind a pleasant, lasting clean fragrance.

ALGAFLOOR is quick and easy to use. It can be applied with any cleaning tool and it needs no rinsing.

Materials
Agglomerate cement-marble | Agglomerate resin-marble | Agglomerate resin-quartz | Slate | Sandstone | Basaltina – Lava Stone | Molted basalt | Cement tile | Concrete | Ceramic Craquele’ | Ceramic Glazed | Clinker | Cotto | Granite | Porcelain gres Lappato | Porcelain gres Honed | Porcelain gres Natural or Structured | Limestone | Marble | Porphyry | Quartzite | Terracotta | Travertine | Tuff

COTTOSOLV is a highly concentrated alkaline-based degreaser that is highly recommended for stripping wax, resin, polymers, and other treatments, even when stubborn and hard to remove. COTTOSOLV thanks to its special formula is extremely effective when it comes to removing natural organic or synthetic polymers and therefore to restore the original appearance of any type of floor covering.

COTTOSOLV as well as being extremely effective on organic polymers is also a particularly powerful means to remove dark oxidation marks, algae, mold, and efflorescence from Cotto, terracotta, or absorbent materials in general. COTTOSOLV is a solution that can remove suction cup marks from ceramic surfaces, caused by processing and handling in industrial environments.

COTTOSOLV is a product that as well as being suitable for use on its own, is often used together with DEC 21 solvent-based wax remover for a full, deep wax removing action, known as “double wax stripping” Double wax stripping is an operation developed especially to remove any organic compound or residue from a surface, such as wax, resin or previous treatments, for example, or even layers or stains of oily dirt.

Materials
Agglomerate cement-marble | Agglomerate resin-marble | Agglomerate resin-quartz | Slate | Sandstone | Basaltina – Lava Stone | Molted basalt | Cement tile | Concrete | Ceramic Craquele’ | Ceramic Glazed | Clinker | Cotto | Granite | Porcelain gres Lappato | Porcelain gres Honed | Porcelain gres Natural or Structured | Limestone | Marble | Manufactured Stone (Eco-stone) | Porphyry | Quartzite | Terracotta | Travertine | Tuff

DECERA/P is an alkaline-based concentrated cleaner with an effective action on oily dirt, even if long standing and built up over time, as well as residues and stains of an organic nature, such as oil or grease, organic polymers such as silicones, wax, resin and surface treatments in general.
DECERA/P is a versatile, effective solution for cleaning floors with a variety of accumulated, long-standing dirt, such as from foot traffic, as well as organic and inorganic residues, and residues from metal working.

DECERA/P is quick and easy to use, meaning it is suitable for large areas, such as industrial flooring, professional kitchens, workshops and mechanical industries, etc. The product is also the ideal solution to remove inorganic residues, such as cement-based fillers or sealants, from all those surfaces that would not withstand an intervention using an acid-based product, such as marble and other natural limestone-based products. DECERA/P is also effective on surface film caused by incorrect floor maintenance.

DECERA/P is a product that as well as being suitable for use on its own, is often used together with DEC 21 solvent-based wax remover for a full, deep wax removing action, known as “double wax stripping” Double wax stripping is an operation developed especially to remove any organic compound or residue from a surface, such as, wax, resin or previous treatments, or even layers or stains of oily dirt.

Materials
Agglomerate cement-marble | Agglomerate resin-marble | Agglomerate resin-quartz | Slate | Sandstone | Basaltina – Lava Stone | Molted basalt | Cement tile | Concrete | Ceramic Craquele’ | Ceramic Glazed | Clinker | Cotto | Granite | Porcelain gres Lappato | Porcelain gres Honed | Porcelain gres Natural or Structured | Porcelain gres Structured | Limestone | Marble | Porphyry | Quartzite | Terracotta | Travertine | Tuff

DEC 21 is a mix of organic solvents and wetting agents that is used to strip wax deep down from surfaces. It is able to remove old residues of synthetic and organic wax, sealants and water- or solvent-based treatments, impregnators, greasy or oily surface stains, or deep, long-standing oily dirt. DEC 21 is recommended to remove previous coats of solvent-based products or to completely strip wax from flooring to restore its original appearance. Although it is extremely effective when it comes to removing dirt, wax, and previous treatments, it will not damage surfaces or change their appearance.

DEC 21 is a product that as well as being suitable for use on its own, is often used together with one of Faber’s strong alkaline-based degreasers, such as COTTOSOLV or DECERA/P, for a full, deep wax removing action, known as “double wax stripping” Double wax stripping is an operation developed especially to remove any organic compound or residue from a surface, such as, wax, resin or previous treatments, for example, or even layers or stains of oily dirt.

Materials
Agglomerate cement-marble | Agglomerate resin-marble | Agglomerate resin-quartz | Slate | Sandstone | Basaltina – Lava Stone | Molted basalt | Cement tile | Concrete | Ceramic Craquele’ | Ceramic Glazed | Clinker | Cotto | Granite | Porcelain gres Lappato | Porcelain gres Honed | Porcelain gres Natural or Structured | Limestone | Marble | Porphyry | Quartzite | Terracotta | Travertine | Tuff

DETERFUG is a slightly acidic cleaner for different surfaces and is especially formulated and developed to clean deep down and remove stubborn dirt from surfaces. Its specific formula means that DETERFUG has a deep cleaning action, even acting within the pores and rough surfaces of materials for fast, complete removal of built-up dirt, without damaging the surface.

DETERFUG can be left to work for several hours with no risk of ruining or attacking treated floor coverings. DETERFUG is active against different types of dirt, including oily or inorganic, and this means it is also ideal for extraordinary surface cleaning operations. When used regularly, it can dissolve and remove dirt that has built up and which daily cleaners cannot shift. Its deep action is also able to remove the dirt that is trapped in a material’s pores or rough-textured surface, leaving the floor completely clean and free from any dirt.

The action of DETERFUG also completely renews grout, removing the build up of dirt and restoring its original appearance. DETERFUG is also very effective when it comes to removing the surface film that can be found on many floors due to insufficiently thorough worksite cleaning or when epoxy or cement-based fillers have been used, or even due to insufficient maintenance or deposits from other detergents. DETERFUG can be successfully used on unpolished limestone surfaces, combining the efficient scale removing action of an acid-based product with the gentle action of its special formula.

Materials
Agglomerate cement-marble | Agglomerate resin-marble | Agglomerate resin-quartz | Slate | Sandstone | Basaltina – Lava Stone | Concrete | Ceramic Glazed | Clinker | Cotto | Granite | Porcelain gres Lappato | Porcelain gres Honed | Porcelain gres Natural or Structured | Porcelain gres Structured | Porphyry | Quartzite | Terracotta | Tuff

DISYCOTT is a highly concentrated, acid-based, end of installation cleaner to remove residues of cement, cement-based grout, dirt and inorganic residues such as salts, limescale and efflorescence. DISYCOTT has a formula containing inhibited acids and specific cleaning agents that has made it possible to replace the muriatic acid normally used to clean after installation.

The result is significantly improved performance plus a drastic reduction in the chemical risks from using particularly aggressive acids. DISYCOTT is fast acting and will not develop fumes; it is also quick and easy to apply and will not damage the appearance of the material or grout.

Materials
Agglomerate resin-marble | Slate | Sandstone | Basaltina – Lava Stone | Ceramic Glazed | Clinker | Cotto | Granite | Porcelain gres Lappato | Porcelain gres Honed | Porcelain gres Natural or Structured | Brick facings | Porphyry | Terracotta

EPOXY RESIDUE REMOVER is an alkaline-based cleaner specifically developed to remove residues and films from grouting and sealing operations carried out using seals or epoxy-based products, quickly and easily. The product can be used for end-of-installation cleaning as well as to remove film or stains caused through incorrect or lack of cleaning once installation has been finished. EPOXY RESIDUE REMOVER is also extremely effective on epoxy residues that have been there for some time.

EPOXY RESIDUE REMOVERacts quickly and easily, even when used on surfaces that are particularly difficult to clean, such as low-thickness materials or those with a micro-textured surface finish. Its mild but effective formula makes it ideal for use on acid-sensitive surfaces since it will not cause corrosion or aggression. EPOXY RESIDUE REMOVER is also particularly effective for the removal of synthetic residues, even if stubborn and have been there for some time, such as graffiti, paint and enamels.

Materials
Agglomerate cement-marble | Agglomerate resin-marble | Agglomerate resin-quartz | Slate | Sandstone | Basaltina – Lava Stone | Molted basalt | Cement tile | Concrete | Clinker | Cotto | Granite | Porcelain gres Honed | Porcelain gres Natural or Structured | Limestone | Marble | Porphyry | Quartzite | Terracotta | Travertine | Tuff | Porcelain gres Structured | Manufactured Stone (Eco-stone) |

FABER 30 is a concentrated alkaline-based cleaner that is extremely effective when it comes to deep-down cleaning of all surfaces with general dirt – including long standing – caused through a normal build up on floors from foot or vehicle traffic. FABER 30 is a versatile cleaner that is quick and easy to use, while being strong on dirt but at the same time, extremely gentle on surfaces, even the most delicate types.

This is why it can be used on floors of all types, including polished marble and glazed, polished ceramics. The special formula and careful balance of active ingredients make this the ideal solution for deep-down cleaning and it also provides excellent results on synthetic floor coverings, such as PVC, epoxy or polyurethane resins, and flooring over large areas used as car parks or vehicle areas, inside and out, since it is particularly active against rubber tracks from tyres, caused by the transit of cars, forklifts and trucks.

FABER 30 can be used according to traditional methods for washing floors, such as cloth or brush, or with mechanical equipment such as single-disc machine or hard floor cleaner.

Materials
Slate | Cotto | Granite | Porcelain gres Lappato | Porcelain gres Honed | Porcelain gres Natural or Structured | Porcelain gres Structured | Marble | Terracotta | Travertine

FABER SOAP is an innovative concentrated cleaner specific to be used to clean polished natural stone floors, like marble or granite. The product combines in one solution the effective cleaning action with the water-repellent protection, increasing at the same time the sheen of the surface.

FABER SOAP cleans and protects the surface from water absorption and increases the sheen of natural stone floors. is the ideal solution for the cleaning of natural stone floors after they have been mechanically or chemically honed and polished. it can also be used for the daily maintenance of every kind of polished natural stone floor.

Materials
Agglomerate cement-marble | Agglomerate resin-marble | Agglomerate resin-quartz | Concrete | Cotto | Limestone | Marble | Travertine

NEUGEL is a concentrated pH neutral cleaner specifically for routine cleaning of all natural surfaces and those materials that are characterised by a medium or medium-high degree of absorption. NEUGEL is extremely effective on dirt but gentle on the surfaces it is used to clean. Thanks to the special formula, which is rich in natural ingredients, NEUGEL nourishes surfaces to bring out their full tone and with time, to increase their dirt resistance.

This also applies to particularly rough and absorbent materials, such as cotto and terracotta. NEUGEL can be used on waxed or treated floors without affecting the efficiency of the protective treatment. On the contrary, NEUGEL adds to the protective effect of the treatment already applied to the surface. NEUGEL has an excellent surface cleaning action and also leaves behind a pleasant, lasting clean fragrance.

NEUGEL is quick and easy to use. It is applied with the traditional surface cleaning tools, needs no rinsing, and its effective dirt-removing action will not damage materials.

Materials
Agglomerate cement-marble | Agglomerate resin-marble | Agglomerate resin-quartz | Slate | Sandstone | Basaltina – Lava Stone | Molted basalt | Cement tile | Concrete | Ceramic Craquele | Ceramic Glazed | Clinker| Cotto | Granite | Porcelain gres Honed | Porcelain gres Natural or Structured | Limestone | Marble | Porphyry | Quartzite | Terracotta | Travertine | Tuff

FABER 30 is a concentrated alkaline-based cleaner that is extremely effective when it comes to deep-down cleaning of all surfaces with general dirt – including long standing – caused through a normal build up on floors from foot or vehicle traffic. FABER 30 is a versatile cleaner that is quick and easy to use, while being strong on dirt but at the same time, extremely gentle on surfaces, even the most delicate types.

This is why it can be used on floors of all types, including polished marble and glazed, polished ceramics. The special formula and careful balance of active ingredients make this the ideal solution for deep-down cleaning and it also provides excellent results on synthetic floor coverings, such as PVC, epoxy or polyurethane resins, and flooring over large areas used as car parks or vehicle areas, inside and out, since it is particularly active against rubber tracks from tyres, caused by the transit of cars, forklifts and trucks.

FABER 30 can be used according to traditional methods for washing floors, such as cloth or brush, or with mechanical equipment such as single-disc machine or hard floor cleaner.

Materials
Slate | Cotto | Granite | Porcelain gres Lappato | Porcelain gres Honed | Porcelain gres Natural or Structured | Porcelain gres Structured | Marble | Terracotta | Travertine

FABER SOAP is an innovative concentrated cleaner specific to be used to clean polished natural stone floors, like marble or granite. The product combines in one solution the effective cleaning action with the water-repellent protection, increasing at the same time the sheen of the surface.

FABER SOAP cleans and protects the surface from water absorption and increases the sheen of natural stone floors. is the ideal solution for the cleaning of natural stone floors after they have been mechanically or chemically honed and polished. it can also be used for the daily maintenance of every kind of polished natural stone floor.

Materials
Agglomerate cement-marble | Agglomerate resin-marble | Agglomerate resin-quartz | Concrete | Cotto | Limestone | Marble | Travertine

FABER POULTICE is a powder thickener to use with certain stain removers in the Faber range. It adds consistency for application over longer periods and to be able to use products on vertical surfaces. It is inert towards the substances contained in the Faber stain removers with which it can be used.

A stain remover with the addition of FABER POULTICE will have a much thicker consistency for much longer contact time with stains compared to what is possible when using the same product in its liquid form. This boosts the efficiency of the whole stain removing process.

FABER POULTICE is normally used together with OXIDANT and NO RUG products, but that can also be used with all of the stain removers in the Faber range.

Materials
Refer to the stain-remover used whit Faber Poultice |

EPOXY REMOVER is a solvent-based paint remover to use on “lumps” and larger epoxy residues, polyester grout, fillers and mastics, enamels, and synthetic materials in general, deposited on the surface of materials. Thanks to its specific formula, the product is also able to bare epoxy grouts when necessary. EPOXY REMOVER acts by dissolving the synthetic top layers on a surface, bringing the treated material back into view without changing its appearance. Thanks to its characteristic gel formula, EPOXY REMOVER has a particularly thick consistency that makes it easy and effective to use on walls and vertical surfaces.

EPOXY REMOVER has a fast, effective action on particularly absorbent supports such as cement, concrete, and natural stone. EPOXY REMOVER can also be used on delicate materials such as marble, lime-based stone and polished stone without the risk of attack or removal of shine. Once applied to the surface being treated, the product works alone without needing any further processes, until it completely dissolves synthetic surface layers. EPOXY REMOVER is quick and easy to apply, and its use will not alter the surface’s original appearance.

Materials
Steel | Agglomerate cement-marble | Agglomerate resin-marble | Agglomerate resin-quartz | Alluminium | Slate | Sandstone | Basaltina – Lava Stone | Molted basalt | Cement tile | Concrete | Ceramic Craquele’ | Ceramic Glazed | Clinker | Cotto | Grout joints Cementicious | Granite | Porcelain gres Lappato | Porcelain gres Honed | Porcelain gres Natural or Structured | Porcelain gres Structured | Limestone | Marble | Porphyry | Quartzite | Terracotta | Travertine | Tuff

EXTRACTOR is a stain-cleaner in powder to mix with water before use. The product was developed to extract colored stains and dampness stains from any type of support, even vertical surfaces. The product, thanks to its special formulation, is very effective against any type of stain, though very delicate on surfaces, even the most sensitive, such as the polished marbles.

EXTRACTOR is characterized by an effective and fast stain-cleaning capacity and its use is extremely easy. Mixed in the right proportions, EXTRACTOR has a dense texture allowing a better performance against the staining agents. Use does not affect the final look of material.

Materials
Agglomerate cement-marble | Agglomerate resin-marble | Agglomerate resin-quartz | Slate | Sandstone | Basaltina – Lava Stone | Molted basalt | Cement tile | Concrete | Ceramic Craquele’ | Ceramic Glazed | Clinker | Cotto | Grout joints Cementicious | Granite | Porcelain gres Lappato | Porcelain gres Honed | Porcelain gres Natural or Structured | Porcelain gres Structured | Limestone | Marble | Brick facings | Manufactured Stone (Eco-stone) | Porphyry | Quartzite | Terracotta | Travertine | Tuff

NO MAC GEL is a water-based stain remover to be used to extract and remove coloured stains from all types of surface With its innovative formulation, the product can offer effective, definitive action on:

– Coffee stains, wine, tea, coca-cola, tomato, and food and drink in general;
– Stains from marker pens and ink;
– Mould, algae and the spread of plants and residues in general, such as stains from leaves, grass and clippings.

NO MAC GEL is a product that can be applied on all surfaces – even the most delicate types such as polished marbles and acid-sensitive finishes – without attacking them or causing them to lose their shine. The special gel formula of NO MAC GEL boosts its stain-extracting action, guaranteeing improved efficiency in terms of stain removal. It is also easy to use and effective on vertical surfaces.

Once applied over the stain to be removed, the product works alone without needing any further processes, until it completely removes the stain. NO MAC GEL is quick and easy to apply, and its use will not alter the surface’s original appearance.

Materials
Agglomerate cement-marble | Agglomerate resin-marble | Agglomerate resin-quartz | Slate | Sandstone | Basaltina – Lava Stone | Molted basalt | Cement tile | Concrete | Ceramic Craquele’ | Ceramic Glazed | Clinker | Cotto | Granite | Porcelain gres Lappato | Porcelain gres Honed | Porcelain gres Natural or Structured | Porcelain gres Structured | Limestone | Marble | Brick facings | Manufactured Stone (Eco-stone) | Porphyry | Quartzite | Terracotta | Travertine | Tuff

MAR GEL PLUS is a unique, innovative stain remover specifically formulated to remove rust stains from acid-sensitive materials such as marble, limestone, and travertine. MAR GEL PLUS is able to penetrate deep into the material, even into the most compact lime-based surfaces, such as brushed or polished finishes.

After treating rust stains with MAR GEL PLUS, the next step is to treat with OXIDANT. MAR GEL PLUS reacts to remove the rust, creating a purple compound that turns darker according to the depth of the rust stain. OXIDANT when applied after MAR GEL PLUS can remove these residues remaining inside the stone, completing the stain removal process.

Materials
Agglomerate cement-marble | Agglomerate resin-marble | Cement tile | Concrete | Limestone | Marble | Travertine |

NO OIL is a solvent-based stain remover to be used to extract and remove grease stains from all types of surface With its special formulation, the product can offer effective, definitive action on:

– Stains from food oil and greasy foods;
– Stains from mineral oil, engine oil, diesel and lubricants
– Greasy stains and bituminous residues.

NO OIL is a product that can be applied on all surfaces – even the most delicate types such as polished marbles and acid-sensitive finishes – without attacking them or causing them to lose their shine. The special thick, creamy formula of NO OIL boosts its stain-extracting action, guaranteeing improved efficiency in terms of stain removal. It is also easy to use and effective on vertical surfaces.

Once applied over the stain to be removed, the product works alone without needing any further processes, until it completely removes the stain. NO OIL is quick and easy to apply, and its use will not alter the surface’s original appearance.

Materials
Agglomerate cement-marble | Agglomerate resin-marble | Agglomerate resin-quartz | Slate | Sandstone | Basaltina – Lava Stone | Molted basalt | Cement tile | Concrete | Ceramic Craquele’ | Ceramic Glazed | Clinker | Cotto | Granite | Porcelain gres Lappato | Porcelain gres Honed | Porcelain gres Natural or Structured | Porcelain gres Structured | Limestone | Marble | Brick facings | Manufactured Stone (Eco-stone) | Porphyry | Quartzite | Terracotta | Travertine | Tuff

NO RUG is a water-based stain remover, especially formulated to remove rust stains from acid-resistant surfaces. The product is also effective on saline efflorescence and dark stains from oxidation.

NO RUG has a particular formulation that allows it to penetrate deep down, even into the most compact surfaces, such as brushed or polished finishes. Once there, it even removes the rust in the thickness of the material. Once applied over the stain to be removed, the product works alone without needing any further processes, until it completely removes the stain.

NO RUG is quick and easy to apply, and its use will not alter the surface’s original appearance.

Materials
Agglomerate resin-quartz | Slate | Sandstone | Basaltina – Lava Stone | Molted basalt | Ceramic Craquele’ | Ceramic Glazed | Clinker | Cotto | Granite | Porcelain gres Lappato | Porcelain gres Honed | Porcelain gres Natural or Structured | Porcelain gres Structured | Brick facings | Porphyry | Quartzite | Terracotta | Tuff

OXIDANT is a water-based stain remover to definitively solve specific types of stain on different types of material. The special, unique formula makes it a definitive, effective solution to:

– Remove yellowing and yellow stains caused through rising damp or water penetration of surfaces;
– Remove damp stains from materials or dark marks caused by water absorption on natural stone.
– Remove stubborn stains such as nicotine and tannin
– Remove particularly stubborn coloured stains not fully removed by using No Mac Gel
– Complete the rust removal stage from marble and lime-based material, removing the purple residue from the extraction action of Mar Gel Plus.

Materials
Agglomerate cement-marble | Agglomerate resin-marble | Agglomerate resin-quartz | Slate | Sandstone | Basaltina – Lava Stone | Molted basalt | Cement tile | Concrete | Ceramic Craquele’ | Ceramic Glazed | Clinker | Cotto | Grout joints Cementicious | Granite | Porcelain gres Lappato | Porcelain gres Honed | Porcelain gres Natural or Structured | Porcelain gres Structured | Limestone | Marble | Brick facings | Manufactured Stone (Eco-stone)| Porphyry | Quartzite | Terracotta | Travertine | Tuff |

NO OIL is a solvent-based stain remover to be used to extract and remove grease stains from all types of surface With its special formulation, the product can offer effective, definitive action on:

– Stains from food oil and greasy foods;
– Stains from mineral oil, engine oil, diesel and lubricants
– Greasy stains and bituminous residues.

NO OIL is a product that can be applied on all surfaces – even the most delicate types such as polished marbles and acid-sensitive finishes – without attacking them or causing them to lose their shine. The special thick, creamy formula of NO OIL boosts its stain-extracting action, guaranteeing improved efficiency in terms of stain removal. It is also easy to use and effective on vertical surfaces.

Once applied over the stain to be removed, the product works alone without needing any further processes, until it completely removes the stain. NO OIL is quick and easy to apply, and its use will not alter the surface’s original appearance.

Materials
Agglomerate cement-marble | Agglomerate resin-marble | Agglomerate resin-quartz | Slate | Sandstone | Basaltina – Lava Stone | Molted basalt | Cement tile | Concrete | Ceramic Craquele’ | Ceramic Glazed | Clinker | Cotto | Granite | Porcelain gres Lappato | Porcelain gres Honed | Porcelain gres Natural or Structured | Porcelain gres Structured | Limestone | Marble | Brick facings | Manufactured Stone (Eco-stone) | Porphyry | Quartzite | Terracotta | Travertine | Tuff

SOLID WAX is a fast-drying, solvent-based solid wax to polish and restore surfaces without foot traffic, such as walls, tops and work surfaces. Its formula, containing top-quality paraffin, gives an excellent shine to the surfaces on which it is used and at the same time, it enhances the tone and look.

SOLID WAX also stands out for its quick, easy application, thanks to its fast-drying action. A surface treated with SOLID WAX is also protected against water and stain penetration, thanks to its water- and oil-repellence, which also make successive cleaning and maintenance operations easier. SOLID WAX is generally used on natural stone surfaces but it can also be used on cotto, terracotta, cement agglomerates, cementine and terrazzo tiles.

Materials
Slate | Basaltina – Lava Stone | Cotto | Granite | Limestone | Marble | Quartzite | Terracotta | Travertine |

B 1/920 is a wax-resin emulsion developed to replace solid or solvent-based liquid waxes. Specific for vertical surfaces or surfaces not subject to foot traffic.

B 1/920 creates a fine, ultra-resistant film that boosts surface shine, bringing out the full colour and aesthetic of the material while simplifying the daily maintenance.

B 1/920 has been specifically developed for vertical surfaces or bathroom tops, stone worktops and also to replace more traditional products with strong, pungent odors due to the presence of strong solvents

Materials
Slate | Basaltina – Lava Stone | Granite | Limestone | Marble | Quartzite | Travertine

TOP CARE is a maintenace cream for tops enhancing the brightness of the treated material. Its formulation sticks hard to the surface offering a high degree of resistance to water and to halos, thus making cleaning easier. The product has been formulated to keep tops at their maximum splendour, as it avoids the formation of limescale halos.

Materials
Countertops – Marble | Countertops – Granite | Countertops – Quartz |

AT LUX is a solvent-based liquid wax rich in high-quality micro-crystals that are both natural and synthetic, specially developed and formulated to intensify the tone of natural materials, guaranteeing excellent stain- and dirt-proof protection.

AT LUX creates a protective layer that is extremely resistant to foot traffic and provides great protection against stains and dirt, leaving the treated surface with a warm, satin finish that brings out the full aesthetic of natural stone.

AT LUX is particularly recommended on natural stone with a distressed, brushed or fine sanded finish and can also be used for excellent results on cement tile and cement agglomerates.

Materials
Agglomerate cement-marble | Slate | Sandstone | Cement tile | Granite | Limestone | Marble | Porphyry | Quartzite | Travertine | Tuff

B 1/920 is a wax-resin emulsion developed to replace solid or solvent-based liquid waxes. Specific for vertical surfaces or surfaces not subject to foot traffic.

B 1/920 creates a fine, ultra-resistant film that boosts surface shine, bringing out the full colour and aesthetic of the material while simplifying the daily maintenance.

B 1/920 has been specifically developed for vertical surfaces or bathroom tops, stone worktops and also to replace more traditional products with strong, pungent odors due to the presence of strong solvents

Materials
Slate | Basaltina – Lava Stone | Granite | Limestone | Marble | Quartzite | Travertine

HIDROFAB is a water-based wax-resin emulsion to use as a self-polishing, finishing treatment for floors in natural stone, cotto, terracotta, parquet, natural wood or concrete. The product seals the textured surface, creating a dirt-proof layer and making daily cleaning and maintenance operations on the floor much easier.

Treatment with HIDROFAB leaves the surface with a polished finish and it slightly enhances the original colour tone of the material. The protective layer created by HIDROFAB also stands out for its excellent water- and oil-repellent characteristics, to protect the surface against the formation of stains.

HIDROFAB is particularly recommended for use on natural stone with a distressed, brushed or fine sanded finish and can also be used for excellent results on concrete, cementina and cement agglomerates, cotto, terracotta and porous surfaces in general.

Materials
Agglomerate cement-marble | Slate | Sandstone | Cement tile | Concrete | Cotto | Granite | Porcelain gres Natural or Structured | Limestone | Marble | Quartzite | Terracotta | Travertine

GL34/A and GL 34/B are the two components of a low-viscosity and solvent free epoxy system, not charged with fillers, reactive and with hardening at ambient temperature.

It is used to resin, the sealing and the hardening of marble, granite and natural stones slabs, but it could be also used for hardening by walls injection ad to waterproof porous and absorbent surfaces.

The system get a perfect catalysis at ambient temperature and at 20-25 °C the system get the maximum of its performances in just 10-15 days

Materials
Agglomerate cement-marble | Agglomerate resin-marble | Agglomerate resin-quartz | Slate | Basaltina – Lava Stone | Granite | Limestone | Marble | Quartzite | Travertine

GL EPOXY 80 is a low viscosity epoxy system with a deep power of penetration into the stone surface. Not chemically charged and solvent free, therefore 100% reactive. The product hardens by room temperature. GL EPOXY 80 has been studied to repair small and medium creeks in any type of marble, granite and natural stones.

Materials
Agglomerate cement-marble | Agglomerate resin-marble | Agglomerate resin-quartz | Slate | Basaltina – Lava Stone | Granite | Limestone | Marble | Quartzite | Travertine

GL 88 is a compound made of unsaturated polyester modified resin, dissolved in monomer styrene, to which is added an unsaturated polyester orthophtalic modified resin, condensed with standard glycol and pre-accelerated with hardener. The preparation has good characteristics of chemical mechanical resistance, brightness and stability after hardening. GL 88 is used for stuccoing, gluing and grouting of marble slabs, stones, agglomerated, travertine and so on…

Materials
Agglomerate cement-marble | Agglomerate resin-marble | Agglomerate resin-quartz | Slate | Basaltina – Lava Stone | Granite | Limestone | Marble | Quartzite | Travertine